Solar panel ruin radio card
I start to figure out why the solar MeshAP failed. After reviewing the software and hardware I found that the radio card died on me. I replace the radio card and everything went back to normal again.
I started to talk with David from Defacto Wireless and he mentioned when low power supply can ruin components. This is hard for me to believe but I he has some merit.
Next time I try this experiment I will reduce the actual operation for only 12 hours.
I started to talk with David from Defacto Wireless and he mentioned when low power supply can ruin components. This is hard for me to believe but I he has some merit.
Next time I try this experiment I will reduce the actual operation for only 12 hours.
2 Comments:
A twofer in the Times
More on the latter in a media watch posting later today. As for the Times sending a reporter to write about offshore wind energy in Europe, accompanied by a photographer - some may respond by crowing that this ...
Find out how to buy and sell anything, like things related to quality assurance highway construction on interest free credit and pay back whenever you want! Exchange FREE ads on any topic, like quality assurance highway construction!
By Anonymous, at 7:31 PM
Voltage regulator or circuitry to shut this down automatically... that's what you need. I've run across these items before, a solar "controller" to regulate power as it comes off the panel or panels...
but this would have been bad power off the batteries, si? Hhhhmmm. Not sure how to control that, but cannot be too difficult, just a matter of C$C$C$.
Are you using the *lowest* power component meshbox in this app? or a used pc box like the compaq?
Good luck,
clinton
P.s. IN your blogger settings, you can require comments to go through "Word Verification" in order to get rid of the spammers! In Go to "Settings" then "Comments" and Click yes for "Show Word Verification"
By Clinton M., at 9:51 AM
Post a Comment
Links to this post:
Create a Link
<< Home